<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>FUJITSU MCU 富士通 单片机</title>
    <link>http://fujitsu-mcubbs.com/bbs/index.php</link>
    <description>Latest 20 threads of all forums</description>
    <copyright>Copyright(C) FUJITSU MCU 富士通 单片机</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Wed, 08 Sep 2010 11:59:04 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://fujitsu-mcubbs.com/bbs/images/logo.gif</url>
      <title>FUJITSU MCU 富士通 单片机</title>
      <link>http://fujitsu-mcubbs.com/bbs/</link>
    </image>
    <item>
      <title>　　第一次</title>
      <link>http://fujitsu-mcubbs.com/bbs/viewthread.php?tid=1453</link>
      <description><![CDATA[　　避站歌词来自互联网
　　第花次
　　光良
　　呈词：吴支杞　呈州：光良 
　　当你砍著吴　角没吃开土
　　已闭你猜透
　　还是没搬握　还是没吃符汜　你伊易甩
　　是角自己想得丑多　还是你下在闪躲
　　如卷泽伊选择是角　吴鼓起屋气申接姓　
　　纯乳纯觉让视线开屈闪烁
 ...]]></description>
      <category>新手入门</category>
      <author>tfl9jom8</author>
      <pubDate>Wed, 08 Sep 2010 07:09:03 +0000</pubDate>
    </item>
    <item>
      <title>如何将字符表放在0xFF4000的位置？</title>
      <link>http://fujitsu-mcubbs.com/bbs/viewthread.php?tid=1452</link>
      <description><![CDATA[我想将一个字符表放在flash的0xFF4000处，我在程序的字符表前加入“#pragma section CONST=FLASHDATA,attr=const,locate=0xff4000”
但在build时出现这样的错误:W1329C: #pragma section: invalid sectionattr specified

请问：这样做，哪里不对？如何做，才能将字符表放在0xFF4000？ ...]]></description>
      <category>16位MCU</category>
      <author>lqs860</author>
      <pubDate>Wed, 08 Sep 2010 03:18:39 +0000</pubDate>
    </item>
    <item>
      <title>公司介绍</title>
      <link>http://fujitsu-mcubbs.com/bbs/viewthread.php?tid=1451</link>
      <description><![CDATA[散热器是各种工程中必备的冷暖交换设备，起加热、制冷、换气作用，综合国内外厂家产品之特点，配合我公司多年来对换热器之研究和改良，目前已能生产各种系列先进优质的高热换热器。
    我公司拥有高速自动冲片机、大型机械涨管设备，真空加热干燥机、清洗机、冷却器、清洗设备、高压捡 ...]]></description>
      <category>新手入门</category>
      <author>jswxjsdg6w</author>
      <pubDate>Wed, 08 Sep 2010 03:16:11 +0000</pubDate>
    </item>
    <item>
      <title>探密特大汽车走私内幕</title>
      <link>http://fujitsu-mcubbs.com/bbs/viewthread.php?tid=1450</link>
      <description><![CDATA[标题：探密特大汽车走私内幕：


内容：

我就是这样一个痴情男，也是一个衰男，苦苦追求女友都十年了，从大学毕业时的一介书生，甘心蜕变成只为房车钱物拼命的芸芸市井，甚至是房奴。我就是她的钱包，她生活舒适的工具，为了她的幸福，我时刻准备着，到现在我都熬成老男人了！ www.gkshebei.com
可就婚 ...]]></description>
      <category>新手入门</category>
      <author>ghij506</author>
      <pubDate>Tue, 07 Sep 2010 23:13:28 +0000</pubDate>
    </item>
    <item>
      <title>探密特大汽车走私内幕</title>
      <link>http://fujitsu-mcubbs.com/bbs/viewthread.php?tid=1449</link>
      <description><![CDATA[标题：探密特大汽车走私内幕：


内容：

我就是这样一个痴情男，也是一个衰男，苦苦追求女友都十年了，从大学毕业时的一介书生，甘心蜕变成只为房车钱物拼命的芸芸市井，甚至是房奴。我就是她的钱包，她生活舒适的工具，为了她的幸福，我时刻准备着，到现在我都熬成老男人了！ www.gkshebei.com
可就婚 ...]]></description>
      <category>MB95200系列</category>
      <author>ghij506</author>
      <pubDate>Tue, 07 Sep 2010 23:13:19 +0000</pubDate>
    </item>
    <item>
      <title>游戏MV制作</title>
      <link>http://fujitsu-mcubbs.com/bbs/viewthread.php?tid=1448</link>
      <description><![CDATA[&shy;
 
祝大家游戏开心 &shy;
 
300元到1000元不等
                 &shy;
 
 
宣传片、个人秀、情侣纪念片
准备好录像、字幕、歌曲、
价钱越高特效越好、歌曲在4分钟内
制作炫舞游戏
&shy;]]></description>
      <category>新手入门</category>
      <author>haihui2088</author>
      <pubDate>Tue, 07 Sep 2010 15:41:58 +0000</pubDate>
    </item>
    <item>
      <title>　　都是生命里温柔灌溉</title>
      <link>http://fujitsu-mcubbs.com/bbs/viewthread.php?tid=1447</link>
      <description><![CDATA[　　(forever love -王力宏)
　　爱你不是因为你的美而已
　　我越来越爱你
　　每个眼神触动我的心
　　(两个人的烟火-黎明)
　　最爱你的是我
　　否则你怎么让我
　　否则我怎么可能赴汤蹈火
　　你说什么都做
　　(如果?爱-张学友)
　　如果这就是爱
　　在转身就该勇敢 ...]]></description>
      <category>新手入门</category>
      <author>ut680741</author>
      <pubDate>Tue, 07 Sep 2010 14:24:47 +0000</pubDate>
    </item>
    <item>
      <title>找培训学校，上苏州培训网</title>
      <link>http://fujitsu-mcubbs.com/bbs/viewthread.php?tid=1446</link>
      <description><![CDATA[找培训学校，上苏州培训网。  wwww.suzhoupeixun.com       
苏州外语培训，苏州会计培训，苏州职业培训]]></description>
      <category>新手入门</category>
      <author>weklu867</author>
      <pubDate>Tue, 07 Sep 2010 13:35:57 +0000</pubDate>
    </item>
    <item>
      <title>MB95430H系列产品工具</title>
      <link>http://fujitsu-mcubbs.com/bbs/viewthread.php?tid=1434</link>
      <description><![CDATA[MB95430H系列产品的工具是什么啊??]]></description>
      <category>8位 MCU</category>
      <author>brbl</author>
      <pubDate>Fri, 03 Sep 2010 14:11:49 +0000</pubDate>
    </item>
    <item>
      <title>求助90F462 PLL倍频</title>
      <link>http://fujitsu-mcubbs.com/bbs/viewthread.php?tid=1433</link>
      <description><![CDATA[CKSCR_MCS=1;
	CKSCR_CS1=1;
	CKSCR_CS0=1;
	CKSCR_MCS=0;  
如此设置4倍频，但是下载后没有变化，时基定时中断没开；MCS=1到MCS=0，也超过了8个机器周期了呀！请大家指点！

]]></description>
      <category>新手入门</category>
      <author>zhangliang</author>
      <pubDate>Thu, 02 Sep 2010 14:52:01 +0000</pubDate>
    </item>
    <item>
      <title>好辛苦找到的折纸大全</title>
      <link>http://fujitsu-mcubbs.com/bbs/viewthread.php?tid=1429</link>
      <description><![CDATA[狗狗 &amp;shy;
　　蜻蜓 
狐狸 
小猫脸
一、植物类 &amp;shy;
蝎子
瓢虫
螳螂
大嘴鸟
五、几种纸船的做法
豹子 
大象
&amp;shy;　　枫叶
蜜蜂
猴子 &amp;shy;
四、昆虫类 &amp;shy;
梅花
鹅
骆驼
&amp;shy;　　小鱼 &amp;shy;
蛇
老鼠
&amp;shy;
三、动物类　　 &amp;shy;
&amp;shy;　　千纸鹤的几种做法 
六、小猫钓 ...]]></description>
      <category>新手入门</category>
      <author>jduiujjr7e</author>
      <pubDate>Tue, 31 Aug 2010 06:50:37 +0000</pubDate>
    </item>
    <item>
      <title>终于被我收藏到了，呵呵，好开心！</title>
      <link>http://fujitsu-mcubbs.com/bbs/viewthread.php?tid=1428</link>
      <description><![CDATA[三军仪仗队方队         《终于被我收藏到了，呵呵，好开心！》
  
 
陆军学员方队
海军学员方队
水兵方队
空军飞行学员方队
空降兵方队
海军陆战队方队
战略导弹部队徒步方队
女兵方队
武警方队
女民兵方队
99式坦克方队
轮式自行迫榴炮方队
轮式自行突击炮方队
反坦克导弹方队
履 ...]]></description>
      <category>新手入门</category>
      <author>jduiujjr7e</author>
      <pubDate>Tue, 31 Aug 2010 06:46:36 +0000</pubDate>
    </item>
    <item>
      <title>求助MB90F462汇编示例</title>
      <link>http://fujitsu-mcubbs.com/bbs/viewthread.php?tid=1427</link>
      <description><![CDATA[为什么富士通官网上MB90F462的例子全是C的呢？那位大侠发点汇编的例子学习下啊？基本的I/O操作，TIMER，PPG这些都行啊，关键是能通过编译]]></description>
      <category>16位MCU</category>
      <author>150629478</author>
      <pubDate>Mon, 30 Aug 2010 07:54:44 +0000</pubDate>
    </item>
    <item>
      <title>请教MB95F212K的下载问题</title>
      <link>http://fujitsu-mcubbs.com/bbs/viewthread.php?tid=1414</link>
      <description><![CDATA[杜工，你好，我想请教你一下，你了解XELTEK  SUPERPRO 5000这个编程器不？我用它来下载MB95F212K的程序，虽然提示编程成功，但是单片机还是不工作，好像是我的偏移地址配置错了，我想请问一下，正对XELTEK编程器来说，每个程序编译之后的偏移地址怎么确定啊？谢谢了 ...]]></description>
      <category>16位MCU</category>
      <author>peach32</author>
      <pubDate>Sat, 28 Aug 2010 02:41:59 +0000</pubDate>
    </item>
    <item>
      <title>01</title>
      <link>http://fujitsu-mcubbs.com/bbs/viewthread.php?tid=1401</link>
      <description><![CDATA[这是新加的空白文章1，可以在UBB可视化编辑器中，添加和修改文章内容。]]></description>
      <category>纯水区</category>
      <author>kuhao74089</author>
      <pubDate>Wed, 25 Aug 2010 12:37:47 +0000</pubDate>
    </item>
    <item>
      <title>MB96F356程序烧写问题</title>
      <link>http://fujitsu-mcubbs.com/bbs/viewthread.php?tid=1396</link>
      <description><![CDATA[请问各位大虾，MB96F356用3.3v供电，需要注意什么，同一个电路板，用5V可以烧写程序，用3.3V的直接报错 ：MCU 32H ，error 001]]></description>
      <category>16位MCU</category>
      <author>zhaoxdfov</author>
      <pubDate>Wed, 25 Aug 2010 03:27:24 +0000</pubDate>
    </item>
    <item>
      <title>MB95F188J烧写工具下载</title>
      <link>http://fujitsu-mcubbs.com/bbs/viewthread.php?tid=1395</link>
      <description><![CDATA[烧写工具，一个通过232烧写的，一个通过BGMA烧写的。]]></description>
      <category>富士通相关</category>
      <author>阿杜</author>
      <pubDate>Wed, 25 Aug 2010 01:30:03 +0000</pubDate>
    </item>
    <item>
      <title>计算校验和</title>
      <link>http://fujitsu-mcubbs.com/bbs/viewthread.php?tid=1383</link>
      <description><![CDATA[我用富士通的MCU写完程序后，想确认他的check sum值，请问怎么样才能看到他的check sum值，如果没有第三方的烧录器的话。]]></description>
      <category>MB95200系列</category>
      <author>fujitsustudy</author>
      <pubDate>Mon, 23 Aug 2010 03:36:01 +0000</pubDate>
    </item>
    <item>
      <title>求：适配器USB驱动</title>
      <link>http://fujitsu-mcubbs.com/bbs/viewthread.php?tid=1342</link>
      <description><![CDATA[我的适配器连接电脑时没有USB驱动可装，哪位有这东西，麻烦传我一个，再次表示感激。
我的目标板和适配器老是连不上，刚插上适配器时提示安装驱动，我没那驱动，所以就无法装，无法用。
或者大家看看我这是什么问题，提出点参考意见来。 ...]]></description>
      <category>MB95200系列</category>
      <author>earlyspring</author>
      <pubDate>Fri, 20 Aug 2010 01:08:50 +0000</pubDate>
    </item>
    <item>
      <title>can的字符存储函数求助</title>
      <link>http://fujitsu-mcubbs.com/bbs/viewthread.php?tid=1341</link>
      <description><![CDATA[各位高手：
本人刚接触富士通90387的can，在参照simple的函数后有几个疑问，
buffer = 0; buffercnt = 1;
if (RCR0 &amp; buffercnt)       /* check if buffer has received message */
    {
      do
      {
        ROVRR0 = ~buffercnt;      /* clear Overrun-flag */

         ...]]></description>
      <category>MCU应用（工具，选型，开发 主论坛）</category>
      <author>daguang95</author>
      <pubDate>Thu, 19 Aug 2010 14:24:14 +0000</pubDate>
    </item>
  </channel>
</rss>